Front View Back View

IOT Gateway

  • An IoT gateway is a hardware device or software solution that bridges the communication between IoT devices (sensors, actuators, or smart devices) and the cloud or centralized data centers.
  • It plays a crucial role in Internet of Things (IoT) ecosystems by facilitating data processing, protocol translation, and secure communication.
  • Collects and consolidates data from multiple IoT devices.
  • Provides centralized control over connected IoT devices.
  • Performs local data processing and analytics before sending it to the cloud.
  • Description

    IOT Gateways swiftly and securely connect industrial IoT – assets and data to robotics, industrial, medical, energy, retail or transportation enterprise networks for enhanced high....

    Features
    • WIFI 2.4GHz IEEE 802.11 b/g/n
    • On board WIFI & BLE Antenna
    • UBLOX NB-IOT/CAT-M1/GPRS Cellular connectivity (Global)
    • UFL connector for external connection of Antenna
    • BLE 4.2 (5.0/5.1/5.2/5.3 bluetooth version available on request)
    • On board 240MHz 32bit Controller. (Can configured to operate @ 40MHz ~ 240MHz)
    • Firmware can be updated OTA
    • RGB LED on board available
    • On board 8MB Flash (Can be configured from 4MB to 16MB)
    • Configurable 12 GPIO’s
    • LED indications available for networks and power managements systems
    • RTC operation supported
    • Board can be configured for only WIFI /Bluetooth or Cellular connectivity
    • Temperature Support -40 0C to 85 0C
    • Board Dimension: 75mm x 41mm
    On Board Interface:
    • Micro USB B-type / DC Power Jack Connector
    • I2C / SPI / UART
    • RS485/ MODBUS
    Power Management
    • Board can be powered by DC jack up to 12V, Max 2A
    • Board can be powered up using USB
    • On board Battery charging
    • On board Battery Health Monitoring system
    • On board 3.3V, 5V and 3.8V supply to support external sensors
    • Support Single Cell Li-Ion Battery for portable applications
    Firmware
    • Manual Reset and Auto Boot
    • Arduino IDE using USB-B Type interface (plug and play)
    • IDF using USB-B Type interface. (plug and play)
    Manufacturing
    • Design, manufacturing and assembly done in India
    Read More

    Specification

    Model Type IOT Gateway
    Input Power Supply (Recommandate) 7V ~ 12V
    Output Power Supply 3.3V / 3.8V / 5V
    Current Limitations Upto 2.5 Amp
    Operating Voltage 5V
    Microcontroller Chip set ESP32-D0WD
    Cellular Module U-blox SARA R412M
    GPIO's Pin's 16 IO's
    DC Current per I/O Pin 40 mA
    Clock Speed 40 MHz
    Flash Memory 8MB
    Power Supply Option DC Jack or USB
    On Board LEDs Yes
    Operating Temperature (°C) -40 to +90
    Dimensions (LxWxH) in mm 75mm x 41 mm

    Applications

    • Wireless Industrial IOT
    • Home Automations
    • Smart Metering
    • Smart Retail Supply Chain
    • Smart Warehousing
    • Asset Tracking